Scan to BIM Services - The Ultimate Guide with all the Solutions Required in Scan to BIM service.

 We are in the era of the 21st century, where modernization has advanced a lot. There is a saying that "change is inevitable". This means that changes are required at an interval period of time that is beneficial in each and every sector. Having said this the same is with the process of the construction industry too. Here today in this blog let us emphasize on the service of Scan to BIM that has completely changed the process and method that use to be taken into consideration for BIM projects and BIM services.

Introduction to Scan to BIM Services

Scan to BIM services is the process and practice that is taken into consideration for creating a digital representation of the current situation and conditions of the building. It has the details of the building that has physical as well as functional characteristics of it in BIM. To get a 3D view of the design, there is a laser scanner that assists in capturing accurate 3D scans of the model which is then imported into a 3D BIM software. The software that is used and taken into use are Autodesk’s Revit, ArchiCAD, Vectorworks, Autodesk Recap, Sketchup, and more. The core reason to have these services is in order to create one of the needed as-built models or to capture the design and that too with the option of real-world conditions.

In the AEC industry, the process of laser scanning was initially practiced and used in the year 1990. The core reason for it was to capture the current details and conditions of the building along with its design purposes. With the change in the process and demand of advanced techniques Scan to BIM Services is quickly becoming a standard practice for a number of companies and people who are either of the ways connected with the service. The list for some of them are laser scanning companies, contractors, sub-contractors, MEP engineers, surveyors and it is all with regards to their Renovation, Refurbishment, Retrofit or Reconstruction Projects which they have undertaken.

Moving further, let us now understand the process of Scan to BIM functions that is being followed and that is completely in this technology-driven industry.

Process of Scan to BIM work?

Below mentioned is the four stages on which the entire process of Scan to BIM services can be divided. 
   • Identification of the required information.
   • Scan Planning
   • Scanning
   • 3D Modeling

Before having an as-built model let us have a detailed understanding about the whole scan to BIM process. This framework of the service that the team follows is as mentioned below in detail.

(1) Information Requirements for BIM Applications

In all the services that have been undertaken, it is an important factor that needs to be taken into consideration and that is related to the requirements that are required for creating models, drawings, designs, before jumping into the process of Scan to BIM services. It is very much necessary firstly to identify the level of detail of the model that is being presented by the client and this is because higher is the model, the accuracy to improve the reliability of the as-built BIM gets increased based on the intended application. However, the higher is the accuracy of the BIM model, higher is the costing too. Thus, here there should be creation of a panel which can control the cost and the data density. This is actually termed as trade-off panel. In this stage the team of engineers identify below mentioned information:

   • Essential elements of building.
   • Necessary Level of Detail (LOD)
   • Required non-geometric attributes

(2) Scan Planning

This stage of work is taken into consideration by the engineers before the acquisition of a 3D scan. This phase of work plays a vital role because at times there is difficulty in finding the existing buildings' design. Hence, with the proper optimization of scanning parameters the services can be beneficial and result-oriented. The entire process of the work includes the identification of all the necessary attributes that are needed in the scanning. Few types of parameters are listed below:
   • Accuracy and precision
   • Space Resolution
   • Coverage
   • Other attributes like location, angular resolution, etc.

(3) Scanning - Capturing the Actual Information

The function of scan to BIM service along with 3D laser scanner, assist in collecting the data that is having high speed and precision. The device that is used in this entire service has eye-safe laser rotating and that too at a great amount of speed. This is generally placed on the tripod at the site, and the laser beam which then hits the solid surface, and with this its position is being recorded as coordinates and it is known as "points". Taking it further, these clusters are then mapped together which is then represented in a highly accurate digital picture. Once all these points are gathered, the scanner will add colors to the design so as to create and develop a 3D map of the site with different views, this is referred to as point cloud scan.

The 3D laser scanner process that captures the interior and exterior structure of the design and drawings, will also have the concealed details of MEPF installations too. The scanned data then is translated with the help of Revit software into a 3D model.

(4) 3D Modeling - Ready for a new set-up or build-up

The next and the final stage of the service is to convert the acquired point cloud BIM scan data into a 3D model and that also with the condition of an existing building. This service is further narrowed down into two aspects.
(a) Deciphering the Point Cloud Data.
(b) Accurate and Detailed 3D modeling.

Benefits of Scan to BIM Services.

Let us proceed further and have a look at some of the benefits of the service that gives a view on as to why to invest in the service and why.

   • Quality: The design that is being derived from Scan to BIM service is more reliable, realistic and of assured 100% quality.
   • Saves time: It diminishes recurring visits to the sites. Thus, it increases the availability of the time with the contractor and its team so as to initiate the planning process and evaluate the risk of the project.
   • Minimal Errors: It facilitates faster decision-making and project alteration.
   • Sustainability: Using the required sets of BIM tools and technology the process becomes easier and this then leads to better sustainability in the project.
   • Saving cost: Sourcing 3D models definitely comes at a high amount of cost, but the same is when compared with the option of traditional 2D models and surveys, it is found to be one of the best processes and results in significant savings.
   • Common Data Environment: Scan to BIM facilitates transparency, better communication, and foster collaboration.

Conclusion: 
It is very much clear on reading this blog that why there is a need for this service. We at Silicon Engineering Consultants Pty Ltd is the leading service provider of Scan to BIM Australia, Scan to BIM Services Sydney, Point Cloud to BIM Services Melbourne, Scan to BIM Revit Brisbane, and many other parts of Australia. Since, the origin of the company is in Australia, it gives an open channel to the clients either to visit them in person or to send email on info@siliconec.com.au to know more about their services or their offerings in detailed Scan to BIM services.

How Schematic Structure Design is a helping hand for future engineering project

On the off chance that you are hoping to breathe life into your fantasy development venture, you will initially need to transform your thought into a useful and sensible structure. There are numerous stages in the life-pattern of a development venture, and each stage has various segment steps that should be finished. The Schematic structure is the same. There are various advances that must be taken before a last task configuration has been picked.

In this article, we will be investigating the initial segment of the plan procedure known as schematic structure. The schematic structure design is one of the most basic segments of the whole plan process. It is during the schematic stage that your thoughts will start to be inspected, tried, and adjusted to this present reality. During this stage, you'll work intimately with your engineer to deliver the basic structure archives for your venture. A short outline of these means in the structure procedure won't just contextualize the schematic plan organize yet in addition light up the proprietor's job all through the venture plan period.

The schematic structure design includes building up the plan over all the structure teaches in light of the affirmed diagram plan, which involves the useful plan brief and idea structure. 

The schematic plan organize is the principal part of this procedure. Commonly, the creation of a schematic plan happens soon after a venture has been begun. Most development ventures start with a proprietor holding the administrations of a development venture chief, who will begin by directing a possibility evaluation of the undertaking to decide its practicality. Comprehensively, when a venture has been seen as reasonable a designer is welcomed ready and starts the procedure for drafting a schematic plan. This denotes the start of the schematic structure arrange.

The objective of the schematic structure organize is to choose a general plan idea for the task. Each development venture begins with a thought. Regularly, a proprietor has a thought for the undertaking that they need to be constructed. Progressing from basically a plan to a functional and sensible structure idea is the focal objective reason for the schematic structure process.

Before the finish of the schematic structure process, two significant features of the task ought to be known. The first is simply the size of the task. During the schematic stage, the proprietor and planner will cooperate to go over the objective of the undertaking and the imagined final product. The modeler will at that point produce various representations for potential undertaking structures before one is chosen. These portrayals will likely have varieties that sway the size of the venture. Put another way, each extraordinary plan will utilize the venture site and accessible space in various and one of a kind ways. This will fundamentally affect the size of the task itself. When a last schematic plan is chosen, the size of the task pushing ahead ought to be characterized.

Characterizing the connection between spaces in the task, and choosing a scale for the venture aren't the main results related with the schematic structure process. Or maybe, these are two of the focal objectives of the schematic plan stage all in all. Leaving the schematic structure process, you ought to have the option to take a gander at the extend and comprehend what the size of the task is pushing ahead, and what spaces are in the last structure and how they identify with each other.The schematic plan period of a development venture is an energizing period in the life-pattern of the undertaking. It is during this stage the proprietor's thought for the venture starts to wake up. The schematic plan process is portrayed by experimentation and will require broad contribution with respect to the task proprietor. 

Toward the beginning of the schematic plan time frame, the engineer will plunk down with the proprietor and assemble however much data as could be expected about the task. They'll at that point produce a progression of potential structure headings that contemplate the planned reason for the undertaking and the site for the task itself. These structures will at that point be refined or wiped out dependent on the proprietor's criticism and suggestions. This procedure will proceed until a last plan schematic has been picked.

The ultimate objective of the schematic plan process is to choose a potential structure for the task, characterize the extent of the undertaking, and show the connection between various pieces of the venture. This will fill in as the reason for pushing ahead with the structure improvement organize where explicit frameworks, hardware, and materials for the task are picked.

We at silicon understand that Schematic Structure Design helps in engineering projects in various ways. Weoffer various range of services from Structural to architectural to mechanical and electrical. We use BIM modelling services, Steel detailing, shop drawings and rebar detailing in various projects.

Precast Detailing Services and the Effective Benefits of Precast.

The overall procedure of precast detailing saves time, energy and reduces manpower. These are the precast concrete panels that are used as the building material worldwide. Nowadays major AEC industries are using these limitless possibilities. This is because the engineers, designers, contractors, and architects are able to know the complete building life-cycle of the building.

Precast panel detailing is the service that stands for the in-depth detailing of the concrete panels. These panels are the cast that is in the form of reusable mold/form. It is the process that is completely cured within the controlled factory environment. These molds are the cured concrete panel that are in later stages directly transported to the construction site.

Moving further, these precast designs are custom made and that is in all types of shapes, sizes, and forms. Some of the panels have horizontal and vertical steel-reinforced concrete ribs, while the others are simply the panel that is simple solid precast concrete panels. The biggest advantage of using this service is to avoid the delay that occurs in the bad weather. The source here is because these concrete panels are created and cast within the controlled factory environment.
Hence, till now knowing what the term precast means, let us proceed further and get the understanding of its benefits and importance of the service. Having considerable expertise in providing the best and feasible precast panel detailing services/precast shop drawings the best is to outsource them with the reputed company. The core reason to select the company is because they have experience and have successfully completed many projects for various companies in Australia.
List of the services that are included in Precast Detailing
Below is the list of the services that play a vital role in the entire process of precast detailing services. No matter in whichever part of Australia the company needs this service Silicon Engineering Consultants Pty Ltd is your one-stop destination to get 100% accurate and satisfied precast services. Thus, let us proceed further and check for the list mentioned below.
(1) Precast Beam Detailing
(2) Precast Concrete Beam Detailing
(3) Precast Panel Detailing
(4) Precast Shop Drawings
(5) Precast Fabrication Drawings
(6) Bills of Materials
(7) Precast Connection Details
(8) Bar-Bending Schedules
(9) Precast Erection Drawings
(10)Quantity Take- Off
(11)Precast Wall Panel Detailing
Benefits of Precast Services
Precast concrete services is an effective, efficient, and highly practical method of work in the field of construction. With the help of this method the construction of the building is possible at a very competitive rate and with most usage of industrial equipment. Now taking it further below is the list of the benefits of this service.
Design-Build Efficiency:
Precast concrete is the service that offers an efficient and effective delivery model of the project. It allows the building construction to be continued while the process of the design is getting developed.
Aesthetically Versatile:
The process of precast concrete can be created in any shape, design, or size. It is completely manufactured in the virtual form that comes with an array of wide colors and varieties of finishes. The only thing with precast is that the complete idea and concept is limited to the imagination process.
Cost Reduction:
The process of manufacturing the precast concrete is completely off-site. It is the service that is ready to install as an when needed. Considering the environmental condition these panels are created. With the help of this innovative process the overall costing of the project is reduced to a great extent along with fewer count of people on the site.
Environment Resistant:
The structures that are created with the help of precast concrete are superior. It assists in providing resistance to the fires, natural calamity, insects, and mold. Likewise other building materials, it provides resistance to the rain, earthquakes, wind damage, decay, termites and others with lower maintenance and insurance costs. Thus overall it is a great option that helps in environment resistance.
Thermal Efficient:
By opting for the services of concrete's thermal there would be a great amount of cost reduction in the overall heating and cooling options in the panels. During the peak hours of heating and cooling the reaction of the concrete will be achieved to a great extent as it changes the temperature depending on the outside weather condition.
Low Maintenance:
In the process of precast concrete the structure can be left unpainted and to this there will be no damage at all to the elements. Now if there is a requirement of painting the same can be done within the time frame of say 5-10 years, and that also will have repainting to the structure. The concrete in the precast is subject to damage as the washing for it is easy and convenient.
Sound Control:
It is all because of the density of the concrete, the buildings that are built in with precast have the quality of absorbing sound and this is the best example for the commercial and residential buildings.
Wi-Fi Compatible:
As the business sector is increasing, the demand for the offices too are increasing and that too with the demand of wired IT services. Well, with the assistance of precast buildings the good news is that they do not interfere with the radio signals, and the local Wi-Fi or internet networks are used effectively and efficiently. This actually makes the entire process of precast most tech-friendly building material.
Eco-friendly:
In the entire precast services the structures that are created are reusable and are recycled making it a good and reasonable option of environmental friendly choice.

Conclusions
On reading this blog, it would be very much easier and convenient to understand what is precast and what are the benefits associated with this service. Silicon Engineering Consultants Pty Ltd has had experience for over 12+ years and knowing the current trends, technology, and software that are ongoing in the industry provides its clients the services that are as per their expectations. So, with this said you can connect with them or with ease can outsource your project anywhere across Australia and the team will revert back to you.
Now no matter whatever services in precast you are looking for they are at your service. So with this you can find the complete services such as Precast Design Australia, PreCast Panel Detailing Sydney, Precast Drawings Melbourne, Precast Concrete Brisbane, Precast Wall Connections Perth, Precast CAD Drawings Adelaide, Precast floors design Newcastle, Precast fabrication Services Perth and many more at your fingertips. For more information send us email on info@siliconec.com.au.

Top 11 Advantages of Pre-Engineered Buildings

Pre-engineered buildings (PEB) is the next level service that is designed by the PEB suppliers or PEB manufacturer. Here the service demands accuracy and a wide range of structural and aesthetic designs. The fabricator uses the best and the most effective raw materials and inventory that are easily available with the required sources and respective team. The term PEMB -pre-engineered metal buildings are being used by the industrial sectors where the process of these structural buildings are created.
It would not be wrong to say that the majority of all the construction industries are adopting the PEB service. Here as the demand for this service has increased subsequently and it is due to less amount and involvement of pre-engineering and custom CAD design.
Moving further, now here is an update on what actually PEB is all about. In the process of PEB, the buildings are built in the factories, that are prepared and made or the element steel. This is then later shipped to the actual site and that too bolted together. This is the service that has brought a revolution to the construction market. Also, it has reduced a huge amount of investment cost along with other costs and expenses. It is the service of PEB in which there is a need to have a large column of free areas for the industrial sectors.

Now taking this service further, in this blog you will come to know about the relevant advantages that are connected with this service .

Reduces Construction Time :  The system and technology have advanced a lot and with the right system approach the construction becomes easy and fast. With the help of certain built-up sections the overall reduction of the steel weight, its cost, and time is reduced. This is all possible with the help of CAD program and use of continuous high strength steel and, light gage secondary steel sections.
PEB are a predefined inventory of the raw materials that has proven and satisfied a wide array of structural and aesthetic requirements. All the components are beforehand engineered properly and are standardized too. Taking this further these standard components reduces the engineering, production and erection time. To increase the speed of the project, customized software for design and drafting can be used. Thus with this said the overall costing of the project can be reduced by 50%. This will then further allow faster occupancy and earlier realization of the income.
Designs : Since the process of PEB is mainly formed by certain sections and connections, therefore the designing time here significantly is reduced. For this purpose there is a special analysis that needs to be done along with a design program of the materials too. This is also the process that is required in drafting services too.
Lower Cost : With the proper system approach, the costing of the design, manufacturing, and erection cost gets reduced to a certain amount. The structural elements are shaped in a manner so that the stress level is reduced in the members. This is connected to the overall reduction of weight, cost, and load of foundations. Another aspect here is the secondary member and cladding nest work that again reduces the transportation cost. The overall cost per square meter reduces to overall 30% as that of conventional steel.
Foundations : Pre-engineered buildings (PEB) are almost 30% lighter than that of conventional steel structures. Therefore, the complete process of its foundation consists of simple design. Also, this is indeed easy to construct and is very light in weight.
Erection and Flexibility of Expansion : As the complete procedure of PEB service is different, therefore the time consumption is more in the process of erection. This is because there are certain standards that needs to be followed. In this the flexibility and expansion of the work is easy and fast. This then can be expanded easily in the length by adding additional bays.
Large Clear Spans : Here the buildings can be expanded upto 90M of height and that is considered to be on the larger spans.
Quality Control : Since the building are ready to use and designed in the factories, hence there is an assurance of quality as its prepared in a quality controlled atmosphere.
Low Maintenance : Buildings that are developed in the factory are supplied with a high paint system and for the cladding purpose and the steel to suit the climatic condition of the site. Thus this results in long term durability and the overall maintenance cost is also less.
Energy Efficient and Wall Systems : To achieve the ‘U’ values, a fibreglass insulated blanket is already preinstalled and these ready buildings are supplied with polyurethane insulated panels.
Architectural Versatility : By opting for the right outsourcing company the architectural work becomes easy and accurate. In this the buildings are supplied in various types and those are in fascias, canopies, and curved eaves. Here even these designs are prepared to receive pre-cast concrete wall panels, curtain walls, block walls and other wall systems.
Single Source Responsibility : One of the biggest benefits in PEB service is that, as these buildings are prepared by one single vendor therefore the compatibility of these building components and its accessories are assured and guaranteed.

Conclusion:
In this blog we have known some of the useful benefits of PEB services. Also, to emphasize more, these services are commonly opted in countries like New Zealand and Australia. Hence, with this said no matter you need Pre-Engineered Building in Adelaide, Pre-Built Steel Structures in Perth, Building Design in Melbourne, Pre-Engineered Metal Buildings in Sydney, or Pre designed steel building Construction in Perth, you can find it all and that too with 100% precision and accuracy.
To know more about the services or to contact the team you can send an email on info@siliconec.com.au or can also call and get the revert from the team.

A thorough electrical system design makes the complete electrical components easy and workable.

Electrical system design, the term itself let us get an overview that what will be the service all about why it is an important aspect in the field of engineering. While opting for this service the important information that is received is the distribution system of electrical power in residential, commercial, and industrial buildings. Without having a thorough understanding of electrical systems the team of engineers will not proceed further in their work. Now the best is to outsource the project with the company that is masters in providing the electrical system design services and that too with proper accuracy and precision.

While proceeding with the design and drawings it is mandatory to follow the national electrical code that is been defined and is an important aspect of electrical system design. Now with all this let us proceed further and check on the definition of “Electrical System Design”. To carry out some operations of electrical components group of electrical systems are connected and taken into consideration. The design can be used as a simple flashlight cell in which two wires can be connected to a bulb or can be involved in the space shuttle. The electrical system design resolves the issues that become a challenge at the time of design and drafting. Thus it ensures that they are economical, safe, and reliable. The complete process includes electrical layouts, earthing, lighting, and voltage drop.



When there is the engineering of any product, electrical system design is an important aspect to be considered. Based on the projects and their requirements different types of electrical system designs are used. As it is one of the important services the complete process from designing to the installation needs additional care. One mistake can lead to massive destruction of human wellbeing and the property. Thus every electrical engineer will make sure that they provide complete and in-depth details of the electrical fittings that are equipped in the building at the time of construction.

Now with this said when we know that what is the importance of the service the best can be done is to outsource the project from a well-reputed organization that has the best team available with them. There are companies that provide services by using software that is mandatory. One of the most commonly used is CAD. So having said this if you are looking for opting for Electrical System Design in Australia then the best you can get in touch with Silicon Engineering Consultants Pty Ltd. The company and the team here are best in providing services that are best for its clients and are 100% accurate.

So no matter you are looking for Electronics CAD Drafting in Sydney or electrical engineering drawing in Sydney or electrical power engineering in Melbourne or electrical building design in Perth or electrical cad drawings in Gold Coast all are available at one single roof and at one single place. Since the company has its presence in Australia, you can get the services in each and every part of it and that too as per the requirement and needs of the clients. Since we understand the importance of the services and the demand for the service the engineers make sure that they do not make any mistake and provide full 100% work to its clients.

Over to you:

Since we understand how important the service is and why it is needed, you can always get in touch with the team of experts either via call,  or can send email on info@siliconec.com.au or can also visit the website. Also, to get the quotes of the services you can also fill the form and get the reply within 24 business hours.

Facade Shop Drawing and Detailing Services | Silicon Engineering Consultants Pty Ltd.

Facade shop drawings and fabrication drawings play a key role in every facade fabrication industry. This service is considered to be the strongest backbones in the industry. A qualitative facade shop drawing services assist in getting approval for the architectural services. The companies and the organization opt for this service because it is the roadmap that is created and used by the installers and the project managers. The ultimate goal for any company when they outsource their project is to get a profitable result and that is what Facade Shop Drawing Services does.

Moving further, we are in an era where digitalization has completed changed the way of thinking and getting the work done smartly and with the required time that needs to be invested in it. With this said let us update you that in Australia the services are very much in demand and the reason for the same is to get the work done efficiently and effectively. So, now if at all you are looking for the company who provides you Facade shop drawings in Sydney, or Facade fabrication drawings in Melbourne then yes Silicon Engineering Consultants Pty Ltd is the right option available for you.

The company here holds years of experience and based on the needs and requirement of its clients’ works on the project and give their 100% in it. The company is not limited to providing services in certain cities of Australia but is catering its services everywhere and all across Australia. With this said no matter you require services of Facade shop drawings in any part of Australia you can fully trust and rely on them. Some of the main services that are very important in this service are provided by them. So, now if you are looking for Facade detailing in Perth, or Facade detailing drawings in Perth, or Facade systems drawings in Adelaide you do not have to search or go anywhere. You can simply get in touch with the company and get the details.

Different types of Facade Shop Drawing Services

As we know the importance of the service we need to also understand what are the different types of Facade shop drawing services that are interconnected with each other and are used in either of the ways in the projects. Below are some of them listed.

• Aluminum Composite Panel (ACP) detailing
• 2D Drafting And Detailing
• Cast Aluminium Railings & Balustrades
• BOQ, BOM & Cutting lists
• Steel & Green façade detailing
• Structural glazing detailing
• Facade Profile Systems
• Spider glazing detailing and Patch fitting assemblies
• Curtain wall(2-Way & 4-Way) detailing

While processing the work of the project one thing that every engineer keeps in their mind is to follow the international codes and standards that are predefined and are mandatory. So, you can rest assured that your project, when outsourced with them, will be completed with 100% accuracy and precision.

Over to you:

The services of Facade drawings and detailing is difficult to visualize and that is where with the help of CAD a 3D visualization of the model can be viewed. This at the end helps the clients’ to get the actual view of their project which they are actually looking for and wanting from the team of engineers.

To know more about the services or want to get a quotation for any service you can either make a call or can drop an email on info@siliconec.com.au and the team will revert back to you within 24 business hours.

Construct a building that is good for today and the best for tomorrow with BIM Services.

The success of any construction building depends on important aspects. One is the time coordination and the other is the efforts and inputs given by the architects and engineers. They are the one who takes full responsibility with the construction project details and simultaneously make sure that nothing is been overlooked or avoided. In the era of the 21st century, the architectural and engineering companies are thinking wisely and opting for an easy and convenient option to get the work completed by choosing the best outsourcing companies who are masters in providing the best BIM services globally.

With the help of CAD software from Autodesk, it has indeed been an easy approach and there is no need to have a team to be appointed in-house and increase the cost. With this said let us proceed further and assist you in getting the work done with 100% accuracy and that too with one of the renowned companies available in Australia.

Silicon Engineering Consultants Pty Ltd presents to you building information modeling services Melbourne that provides full-fledged services that are part of BIM. Since the company has its presence in Australia, the companies do have the option available to outsource their project anywhere across Australia. Now if at all you want the company to provide you 4D BIM services in Sydney, or BIM shop drawings in Newcastle you can easily contact them and let them know your needs and requirements and based on that the team will be preparing the design and drawings for you.



Now moving further let us check on some of the basic importance of BIM services that will give a complete look at the services and how you can get them used in your project by outsourcing it.

• Productivity gets increased
The complete management of BIM is a single point where references assist in improving communication and operational efficiency. With this process, it is easy to cut down the part of cross-referring and the possibility of getting the approval on the project gets faster. Thus, with the correct BIM outsourcing company, you can get a lot of work done with ease and comfort.

• Reduces cost
This is the part where the cost indeed gets reduced. This is because once the productivity increased and the work is going with perfection and coordination there are the chances that the overall cost of the project gets reduced along with the investment of the time.

• Rework becomes less
If there is any information that is lacking between the designer and the executioners which leads to delay in work here gets avoided and this is also because the team is ready with all the updated changes. As BIM services are centralized, hence any changes can instantly be updated and each one of them working on the project will get the update. Thus, the thinking of getting the work done again becomes nill and there are zero construction errors.

• Submits relative and related documents
As we are very well aware that the infrastructural work demand 2D and 3D drawings of the designs, still they lack some of the other information. These are like the contract agreement, bills of purchase, bids, schedules, specifications, and guidelines specified by the government and much more. This is where BIM services come into existence and make all this work easy and fast.

• Gives a complete view of the project
Likewise, there is a general practice that one team is not aware of the work that the other team has done, in BIM this is not the case. Here each and every person who is associated with the project is well updated with every stage of the work that is taking place. They can easily communicate with the team and get the updates over the call, email and can track the status of the project.

• Improves team coordination
With the streamlined process of BIM services, it has indeed become very easy to coordinate with the team and be updated on the complete project as an when required and that too irrespective of whichever part of the world you are residing.

• Enhances customer satisfaction
The overall quality of the project, speed, and updates given by the team increase the trust of the customer and which leads to providing 100% satisfaction to them and making them happy with the final outcome of their project.

Over to you:
Well, here in this blog you would have got the details related to the BIM services and its importance. Now moving further we would also like to let you know that the company is having the team of well-trained and efficient staff who are best in providing architectural BIM modeling in Melbourne, BIM design services in Australia, BIM management Melbourne, Fire BIM services Newcastle, plumbing BIM services Perth, and other CAD and engineering services in all across Australia.
To know more about the offerings of the company you can contact over the phone or can email them on info@siliconec.com.au and the team will revert back to you within 24 business hours.

Welcome to the Generations of Shop Drawing.

Modern technology and services have advanced a lot. No matter you are in whichever industry, the services are been taken to another level. While reading this blog, you find that the focus is on the roles of Shop drawings, Steel Fabrication, Millwork Drawing, and HVAC systems.
When there are any presentations to be given to the client, there are many ways to do it. Some of the way which has been followed is by creating sketches for product design, modeling a prototype for hands-on interaction or a visual demonstration and pitch of a product.

When it comes to creating a product, these visual representations, and concepts is not enough. A precise concept of a sketch of a building can stimulate the imagination. Here you will get the final layout of the product which will be looking real. But this cannot be used to create the components of a building to be assembled.

Here is where the concept of shop drawings is required. The team of specialized and trained staff is best for this service. The process of shop drawings can be followed in the form and can be assembled within controlled and calculated constraints. But have you ever thought as to how to take these images and concept sketches to the manufacturing stage? Once the client is satisfied with the design how can they move to the next stage with the initial concept drawings? All this needs to be taken care of and that is why the team of experienced is needed for their help.



The best support here we will get is from the team of shop drawings or technical drawings staff. These drawings show the information that instructs the manufacturer and make them understand. This understanding is all that the end product should look like and how it should function.
To make it more precise and clear, here the example which will give more clarity as well.

For example, a structural engineer first needs to create a steel fabrication drawings. This will be for a steel manufacturing company, to make them understand the specification of steel beams and columns need to be produced by the company. It will also need drawing for the HVAC system too. The need for this is to know the system map of how a building will be ventilated. The vehicular movement of indoor air quality along with the transmission of thermal dissipation throughout the building.
Hence, on seeing a drawing plan will always help to encourage discussion and ideas. The team of HVAC designers can use a floor plan of a building so that they can plan how air will move through it. It will also have the thought on how and where the HVAC system will be installed to ensure company standard efficiency.

The advanced and modern-day shop drawings or technical is created with the help of CAD software. Some of them are AutoCAD or Revit. The hand-drawn technical drawings are not so common these days. It is a dying art that has reduced to quick sketching for conveying ideas and concepts instantly. That is why this post will be the focus on drawings produced by using CAD drafting.
Present Design Information & Assembly Instructions Clearly.

The service which will display a scaled outline of how the final product will be assembled is "Shop Drawing." It will give all supporting information about what material is to be used, what will be the dimension of the product, the hidden components represented by dashed lines, the intended weight of the product, product-specific treatments such as 'galvanizing steel' and more.

A set of steel fabrication drawings, for example, will contain the drawings of steel components. This will give you the view from top to bottom showing specific connection details. It can also have 3D details to give a better perspective. Here, the component will have its measurement displayed which will be backed by supporting information such as Column to be primed with a protective oxide coating.

These drawings will give clarity to the fabricators to produce exactly what is required and specified for the use on the construction site.

Duplication Creation of the Same Products

Shop drawings give specific instructions and information. The process will require multiple times of designs to be created. This will also include the process of duplication of the same design and the same product every time.

The services can be useful when there is a requirement for multiple of the same components. The best example is the roof joists. It is also useful if the manufactured components are or become defective for some reason. In such a case, the exact duplicate can be rolled and formed.

If there is a contractor scheme for the development of a new house, duplications will save time and money. This is because all the houses are the same as planned and built.

Documentations

Shop drawings can be used as documentation which can be later referred to if something is amiss. For example, if a structural steel column is delivered on-site and if it seems to be tall, the designer can refer it and point the cause and time for the defect.

No matter it is the fault of the designer or the manufacturer if the design is been documented the solution to the problem can be identified soon. This will also give the pathway to determine further course of action as well.

Such documents may be compiled to seek approval. This is required by a qualified and accredited engineer. This will act as a supporting document to submit the planning authority for approval to build.

Keeping an Accounts of Components

It helps in keeping track and record of the components which are required in the construction site. If there is a large structure of the project, and you need loose parts to be assembled and delivered then it will work. As all these loose parts will be then delivered in one single piece.

Later each of these separate components will be presented in a part that needs to be organized. It can be labeled as "Part 1" and "Part 2" and so on. This can then be supported by an overall drawing which will show the final structure it is supposed to be looking. It will then later be functioned when all parts are assembled together on the site.

This can further be said for the whole building itself where each part of the building can be set in a group of drawings. Further, each set of steel fabrication drawings can be organised as per the delivery dates of the projects.


Reliable Costing

In a manufacturing business consideration of costs is a big part. And thus it should be taken into consideration carefully. Well, here is where shop drawings helps to determine the cost of the materials precisely. It is totally on the basis of the materials needed for manufacture. It helps to prevent time wastage, and overstock of the items.

They can create a plan and schedule the order in line with a current or future project to increase storage time. Usually it is seen that manufacturer will order 10% extra material then required to be at the safer side.

No doubt it may include incorrect sizes of components, and if its not possible to form it again, they can be recycled. These components can be prepared again using the extra material which is ordered.
Here the good thing about CAD software like Revit is that, its BIM tool. This means to get the exact specification and the model components fit together BIM is created in Revit. This can later be used in future to check for further components too.

The schedules further can be used to find out how much of what material is being used in the model. Along it will also have the weight of the components. This information is used to determine how much material is to order and how much it will cost.

The schedules will calculate the grand total of everything so that the figures can be used to determine the exact quotes for orders. Hence it would not be saying wrong that scheduling is a large part of the construction world.

Moving further there are some more benefits which you should consider when having the services of shop drawings. These benefits are real time corrections before the issue, portability, training, uniformity, and drawing sheet an act of promotion.

Hence, these are some of the advantages of using shop drawings. Hope it will help you and your business to get the result accurately and aptly. Apart, the costing can also be negotiated but for the same you need to get in touch with the right company or the firm who are using these technologies and are advanced with skilled knowledge.

Over to you:

No matter you are in whichever part of Australia or country if you need these services like Structural Shop Drawings Brisbane, Structural steel shop drawing services Brisbane, Facade Shop Drawing Services Adelaide, Structural steel shop drawing services Adelaide, your one stop destination is only here.

To know more about the services you can contact us or send us an email on info@siliconec.com.au or can visit our website https://www.siliconec.com.au/.

Not only this, the company has a team of experienced and skilled employees who closely work in providing ideas in many parts of Australia. So, the list of our work speciality is as mentioned here.